纺织圈子里有条不太上台面的鄙视链：做涤纶长丝的看不起做短纤的，做短纤的看不起做纺纱的，做纺纱的又觉得上浆那档子事就是"调浆糊"。
可有意思的是，真到了经纱上浆这道工序，谁也绕不开PVA。没有它，高支高密的布根本织不出来，纱线一上机就起毛、断头、飘纱。
更有意思的是，PVA这东西正牌贵得咬手，小厂又不敢随便买副牌——怕溶解性不对，一缸浆调废，整轴经纱跟着报废。
说白了，PVA不是没人要的大路货，是纺织浆料和维纶纤维里那个"看不见但离不了"的角色。这篇就把PVA副牌的底细说清楚，看完你再决定副牌到底能不能上你的调浆缸。
PVA不是塑料，是靠水溶干活的
PVA学名聚乙烯醇，是一种水溶性的热塑性树脂。
注意，它跟普通塑料不一样。别的塑料靠加热熔融注塑，PVA靠水溶——冷水慢溶、热水快溶，溶成透明胶液，再去上浆、成膜、纺丝。
它能干的活儿不少：纺织经纱上浆、维纶纤维抽丝、聚乙烯醇光学膜（偏光片核心那层）、PVB中间膜原料、纸张涂层、可水溶包装膜。
全球格局高度集中。按产能和市场份额口径，国外前三家基本被日本包圆。
第一梯队是日本可乐丽（Kuraray），旗下POVAL™系列，年产能约25.8万吨，在日本冈山、柏崎、德国法兰克福赫斯特、美国得州都有装置，全球份额约两成上下，其中PVA光学膜原料更是占了全球七成到八成。
第二梯队是日本合成化学工业（Nippon Gohsei，现属三菱化学集团体系），Nichigo G-Polymer牌号，产能约18.5万吨，份额约一成二。
第三梯队是日本积水化学（Sekisui Chemical），产能约15万吨，在西班牙塔拉戈纳和美国都有装置。
这三家加起来，把全球高端PVA的话语权攥得死死的。
副牌不是次品，是醇解度化验单上差了半格
那PVA副牌到底是怎么回事？
先说定义。同一厂家、同一牌号的PVA，出厂检验时有些批次个别指标没完全踩到达标线，合格的贴正牌标签，没完全达标的就是副牌。它还是原厂原生聚合粒子，不是废旧料再造粒。
四大来源：装置开停车时的头尾料、牌号切换时的过渡料、工艺波动导致醇解度或粘度小幅超标的批次、副线尾料。
边界要分清：
| 类型 | 来源 | 品质 | 典型用途 |
|---|
| 正牌 | 原厂达标批次 | 全指标达标、批次稳 | 光学膜、高端纺丝、认证件 |
| 副牌 | 原厂未达标批次 | 个别指标小幅偏离，基材与正牌一致 | 普通浆料、内件、配色膜 |
| 回料/水口料 | 加工边角料再造粒 | 已受过一次热历史 | 低要求制品 |
| 再生料 | 废旧塑料回收造粒 | 性能波动大 | 低端填充 |
PVA有个特殊点：它是水溶加工，醇解度和粘度这两个指标直接决定溶速和胶液粘度，副牌往往就差在这两项上。
可乐丽POVAL，光学膜之外才轮到副牌说话
先说可乐丽。这家是PVA行业绕不开的名字。
POVAL™是它的招牌。高醇解度牌号做经纱上浆和维纶纤维，低醇解度牌号做PVB和粘合剂。光学级PVA膜原料它几乎一家独大。
它的副牌长什么样？多数是醇解度差一两个百分点、或者粘度落档半级的料。分子链没换，水溶后胶液透明度和粘结力跟正牌基本一个水平，但做光学膜这种要求醇解度极稳的活儿就不敢用。
用在哪？纺织上浆、普通维纶短纤、纸张涂布、工业粘合剂。这些场合对醇解度的容忍度高一点，副牌完全顶得住。
日本合成化学，冷水速溶这条线是它的主场
再说日本合成化学工业。这家走的是特种路线。
Nichigo G-Polymer是它的水溶PVA牌号，特点是冷水速溶、低粘度、高分散。它在高阻隔水溶膜和光学级领域有自己的专利。
它的副牌，常见是聚合度和醇解度贴在临界线附近的批次。跟可乐丽副牌比，合成化学的副牌更偏"规格边缘料"——不是品质差，是化验单上某项指标贴线。
用在哪？水溶包装膜、纺织浆料里的速溶组分、陶瓷工业粘合剂。它的副牌在要求冷水速溶的场合反而好用，因为那一项偏差对速溶影响不大。
积水化学，配套PVB线下来的副牌别乱认
第三家是积水化学。这家很多人不知道它做PVA，但它在PVB中间膜和PVA树脂上是老牌玩家。
它的PVA装置分布在西班牙和美国，走的是配套PVB的路子。副牌多为配套自己PVB线时产生的过渡料，或者粘度波动的批次。
用在哪？胶水、纤维加工、普通成膜。积水的副牌在国内流通量不算大，但一旦碰到，性价比不错，关键是要认清楚装置来源，别把别的厂的料挂在它名下。
PVA副牌溶速差半拍，上浆纱线起毛断头
PVA副牌怎么挑？说几个实在的坑。
第一，先问醇解度。PVA副牌最常出问题的就是醇解度飘，醇解度差一个百分点，上浆粘度差一大截，纱线手感完全两样。进厂先测醇解度和粘度，别拿塑料那套测熔指的思路往PVA上套。
第二，问清用途匹配。光学级、偏光膜这种高要求件，老老实实上正牌；上浆、普通成膜、粘合剂，副牌够用。别拿副牌硬怼光学件。
第三，看批次留样。PVA副牌批次间粘度可能飘，每批留样、小试一缸浆再放大，别一上来就整轴上机。
海口有家做经纱上浆加工的客户，之前图便宜买了批来路不明的"日本PVA"，结果溶速慢了半拍，调出来的浆粘度忽高忽低，织出来的布经纱起毛断头率拉到8%，一整批坯布降等。后来换成可乐丽同牌号副牌，醇解度和粘度每批留样对标，断头率压到0.5%以内。
这就是选型的价值——PVA副牌不是不能用，是你得知道它差在哪项、差多少。宁波市科隆新材料有限公司做进口PVA副牌多年，类似的浆料配方匹配每年经手几十起，说白了就是帮你把"溶速对不对、粘不粘得住"这种事，在整轴上机之前先验证掉。
科隆仓库现货｜PVA赔偿
主推品牌：日本可乐丽Kuraray（POVAL）、日本合成化学Nippon Gohsei（Nichigo G-Polymer）、日本积水化学Sekisui。
主要牌号：POVAL、Nichigo G-Polymer。
包装规格：大包装、小包装都有，小包装试机打样，大包装、吨包料量产摊薄。
仓库现货：PVA副牌仓库现货通常在3000-6000吨，常年备货不断档。
其中小包副牌备货500-800吨、箱装副牌备货200-400吨、大包料/吨包料备货2500-4800吨，按订单配比灵活出。
供应保障：原厂原包直采，批次留样可追。
六句口诀，PVA副牌不翻车
说了这么多，给你一个能直接用的选型口诀：
光学膜、偏光片——正牌，别省；
经纱上浆、维纶短纤——副牌可用，先测醇解度；
冷水速溶要求高——认准合成化学路线；
普通成膜、粘合剂——副牌性价比高；
每批留样、小试浆料再放大；
别拿副牌怼光学级认证件。
PVA这材料，说简单是水溶，说复杂是醇解度和粘度的精细活儿。选对副牌，一吨省的钱够调好几缸浆；选错了，一轴经纱全赔进去。
资料与数据来源
- 皖维高新2025年年度报告、2026年度向特定对象发行股票审核问询函回复（可乐丽约25.8万吨、积水化学约15万吨产能口径）
- Dataintelo《Polyvinyl Alcohol (PVA) Resin Market》（可乐丽约16.8%-24.3%、日本合成化学约12.4%、积水化学约9.7%份额口径）
- DataVagyanik《Polyvinyl Alcohol (PVA) Market》及雪球行业研究（可乐丽PVA光学膜约70%-80%份额口径）
- Global Growth Insights《Polyvinyl Alcohol (PVA) Market》主要厂商名单交叉核验
-
There is an unofficial hierarchy of disdain in the textile world: those who produce polyester filament look down on those who make staple fiber, those who make staple fiber look down on those who do spinning, and those who do spinning think that sizing work is just 'slurry mixing'.
Interestingly, when it comes to the warping sizing process, no one can bypass PVA. Without it, high-count, high-density fabrics simply cannot be woven; the yarn will fuzz, break, and fly off as soon as it goes on the machine.
What's even more interesting is that genuine PVA is ridiculously expensive, and small manufacturers don't dare to buy generic brands casually—afraid that the solubility won't be right, a whole vat of paste could be ruined, and the entire warp of yarn could be wasted.
To put it bluntly, PVA is not some unwanted commodity; it’s the 'invisible yet indispensable' player in textile pulp and vinylon fiber. This article will clarify the details of PVA byproducts, so you can decide whether these byproducts can really go into your pulping tank after reading it.
PVA is not plastic; it works by being water-soluble.
The scientific name of PVA is polyvinyl alcohol, which is a water-soluble thermoplastic resin.
Note, it is different from ordinary plastics. Other plastics rely on heating to melt and injection molding, while PVA dissolves in water—slowly in cold water, quickly in hot water—turning into a transparent glue-like liquid, which is then sized, formed into a film, and spun into fibers.
It can do quite a lot of work: sizing warp yarns for textiles, drawing vinylon fibers, making polyvinyl alcohol optical films (the core layer of polarizers), producing raw materials for PVB interlayers, coating paper, and making water-soluble packaging films.
The global landscape is highly concentrated. In terms of capacity and market share, the top three foreign companies are basically dominated by Japan.
The first-tier company is Japan's Kuraray, with its POVAL™ series, an annual production capacity of about 258,000 tons, and facilities in Okayama and Kashiwazaki in Japan, Frankfurt-Horst in Germany, and Texas in the United States. Its global market share is around 20%, and its PVA raw materials for optical films account for 70% to 80% of the global market.
The second tier is Japan Synthetic Chemical Industry (Nippon Gohsei, now part of the Mitsubishi Chemical Group), with the Nichigo G-Polymer brand, a production capacity of about 185,000 tons, and a market share of about 12%.
The third tier is Japan's Sekisui Chemical, with a production capacity of about 150,000 tons, and it has facilities in Tarragona, Spain, and the United States.
These three companies together tightly control the global discourse on high-end PVA.
The secondary brand is not a defective product; the difference is that it was half a notch off on the maturity test report.
So what's the deal with the PVA sub-brand?
Let's start with the definition. For PVA from the same manufacturer and the same brand, some batches may not fully meet certain inspection indicators when leaving the factory. Those that pass are labeled with the main brand, and those that don’t fully meet the standards are labeled as a secondary brand. It is still made of the original polymer particles from the factory, not recycled material.
The four main sources: head and tail materials when starting or stopping the equipment, transition materials during grade switching, batches with slight exceedance in alcoholysis degree or viscosity due to process fluctuations, and tail materials from the secondary line.
Boundaries need to be clear:
| Type | Source | Quality | Typical uses |
|---|
| Authentic brand | Original factory standard batch | All indicators meet the standards, batch stability | Optical films, high-end spinning, certified parts |
| Side deck | Original factory substandard batch | Individual indicators slightly deviate, but the base material is consistent with the genuine brand | Ordinary slurry, internal components, color matching film |
| Recycled material / Sprue material | Processing scrap material into regranulate | Has undergone one heat history | low-specification product |
| Recycled material | Recycled Plastic Pelletizing | Performance fluctuates greatly | low-end filling |
PVA has a special characteristic: it is processed to be water-soluble, and its degree of alcoholysis and viscosity directly determine the dissolution rate and the viscosity of the glue solution. Secondary brands often fall short in these two aspects.
Coca-Cola POVAL, it's only after the optical film that the secondary brand gets to speak
Let's talk about Ke Le Li first. This company is an unavoidable name in the PVA industry.
POVAL™ is its signature. High alcoholysis degree grades are used for warp sizing and vinylon fibers, while low alcoholysis degree grades are used for PVB and adhesives. It almost has a monopoly in raw materials for optical-grade PVA films.
What does its secondary brand look like? Most of them have an alcoholysis degree that is off by one or two percentage points, or a viscosity that falls half a grade. The molecular chains haven't been changed, and after dissolving in water, the glue solution has transparency and adhesion basically at the same level as the main brand, but for tasks like making optical films, which require extremely stable alcoholysis degrees, it can't be used.
Where is it used? In textile sizing, ordinary vinylon staple fiber, paper coating, and industrial adhesives. These applications are more tolerant of alcoholysis degree, so the secondary brand can fully handle them.
Japanese synthetic chemistry, the cold water instant line is its main field.
Then there's Japan's synthetic chemical industry. This one follows a specialty route.
Nichigo G-Polymer is its water-soluble PVA grade, characterized by fast dissolution in cold water, low viscosity, and high dispersion. It has its own patents in high barrier water-soluble films and optical grade fields.
Its by-products are commonly batches where the degree of polymerization and degree of alcoholysis are near the critical line. Compared with Keleli by-products, synthetic chemical by-products lean more towards 'marginal specification material' — it's not poor quality, it's just that some indicator on the test report is on the line.
Where is it used? In water-soluble packaging films, quick-dissolving components in textile sizing, and adhesives in the ceramics industry. Its by-brand is actually more useful in situations requiring cold-water quick dissolving, because that particular deviation has little impact on the quick dissolving.
Jishui Chemical, don't randomly recognize the sub-brands that come down with the supporting PVB line
The third company is Sekisui Chemical. Many people don't know that it produces PVA, but it is an established player in PVB interlayers and PVA resin.
Its PVA facilities are located in Spain and the United States and follow the route of matching PVB. The sub-brands are mostly transition materials produced when matching their own PVB lines or batches with viscosity fluctuations.
Where is it used? Glue, fiber processing, general film formation. The subsidiary brand of Jishui does not circulate much domestically, but once you encounter it, the cost-performance ratio is quite good. The key is to clearly identify the source of the equipment, so as not to misattribute materials from other factories under its name.
The PVA secondary brand dissolves at a speed difference of half a beat, causing the sized yarn to fuzz and break.
How to choose a PVA sub-brand? Let me point out a few real pitfalls.
First, ask about alcohol dissolving first. The most common problem with PVA secondary brands is alcohol disintegration rate—a 100% difference in alcohol disintegration makes the sizing viscosity much worse, and the yarn feels completely different. Before entering the factory, test alcohol lysis and viscosity; don't apply the plastic melting test method to PVA.
Second, make sure the intended use matches properly. For high-demand parts like optical grade and polarizing film, honestly use the genuine brand; For sizing, regular film, and adhesive, the secondary brand is sufficient. Don't use the secondary brand to directly challenge optical components.
Third, check the batch samples. PVA secondary brands may have viscosity between batches; keep samples per batch, test one batch of slurry, then scale up, and don't load the whole shaft right away.
There is a client in Haikou specializing in warp yarn sizing processing. Previously, they bought a batch of unknown "Japanese PVA" at a low price, but the melting speed was half a beat slower, causing the sizing viscosity to fluctuate, and the warp yarn bristling rate of the woven fabric yarn was raised to 8%, reducing the whole batch of greige fabric. Later, they switched to the same grade of Kuraray sub-brand, matching alcohol dissolution and viscosity per batch sample, reducing the breakage rate to below 0.5%.
This is the value of selection—PVA sub-brands aren't unusable, but you need to know what and how much they differ. Ningbo Kelong New Materials Co., Ltd. has been making imported PVA sub-brands for many years, handling dozens of cases annually for similar sizing formulas. Simply put, they help you verify whether the melt speed is correct and whether the adhesion is adhered before the whole shaft is put on the machine.
Cologne warehouse in stock | PVA compensation
Main recommended brands: Kuraray (POVAL) (Japan), Nippon Gohsei (Nichigo G-Polymer) (Japan), Sekisui Chemical (Japan).
Main grades: POVAL, Nichigo G-Polymer.
Packaging specifications: Both large and small packages, small packaging trial machine samples, large packaging and ton-pack material mass production and thinning.
Warehouse stock: PVA secondary warehouse stock usually ranges from 3000-6000 tons, with year-round stock never backing up.
Of these, small sub-brand stocks are 500-800 tons, sub-brand containerized stocks are 200-400 tons, and large packages/ton are 2500-4800 tons, flexibly distributed according to order ratios.
Supply guarantee: Direct procurement from original factory packages, batch samples can be tracked.
Six mnemonics: PVA sub-brands won't fail
After saying so much, here's a practical selection tip:
Optical film, polarizer—genuine brand, don't save money;
Warp yarn sizing, vinylon staple fiber—sub-brand available, first test alcohol dissociation;
High requirements for cold water instant dissolution—choose the synthetic chemistry route;
Ordinary film forming and adhesives—secondary brands offer high cost-effectiveness;
Each batch of retained samples and small test slurries is scaled up;
Don't use secondary brands to challenge optical-grade certified parts.
PVA this material, it's simple but water-soluble; complex is the delicate work of alcohol solubility and viscosity. Choose the right secondary brand, and one ton saves enough to prepare several batches of slurry; If you choose the wrong one, you lose all the warp yarn on the shaft.
Data and Sources
- Reply to Wanwei High-Tech 2025 Annual Report and 2026 Specific Target Offering Inquiry Letter (Kuraray approximately 258,000 tons, Sekisui Chemical about 150,000 tons capacity)
- Dataintelo "Polyvinyl Alcohol (PVA) Resin Market" (Kuraray approximately 16.8%-24.3%) Japan's Synthetic Chemical about 12.4%, Sekisui Chemical about 9.7% market share)
- DataVagyanik 'Polyvinyl Alcohol (PVA) Market' and Xueqiu Industry Research (Kuraray PVA optical film about 70%-80% market share)
- Global Growth Insights 'Polyvinyl Alcohol (PVA) Market' major manufacturer list cross-verification
-
